- High-capacity exhaust fans used in tunnels and transition aeration. It is used with the purpose of cooling the poultry and obtaining the desired air velocity. It is preferred with low maintenance cost and long service life.
- Propeller : 6
- Wing Diameter: 1240 mm
- Engine: 1.5 HP - 1.10 KW.
- Diametr: 1380 × 1380
- Capacity: 42.000 m3 / h
- Ideal solution for poultry ventilation with high capacity and high air extraction power.
- Specially designed air duct, high air extraction capacity.
- Energy saving thanks to specially designed propeller.
- Propellers are produced as stainless steel and galvanized.
- Each engine has been individually tested for 100% quality control.
- Ideal for minimum ventilation. The poultry is placed in the side wall, the main purpose is to collect the clean air that is needed without cooling the poultry, and to throw the polluted air out of the poultry house.
- Propeller Adedi: 6
- Wing Diameter: 840 mm
- Engine: 0.75 HP - 1.00 KW
- MEASURE: 980 × 980
- Capacity: 16,000 m3 / h
- EC50 cone fan, 50 inch fan with cone discharge, high air flow capacity for high static pressures and low energy consumption make it the ideal fan.
- Roller shutters are manufactured from pressed galvanized steel to provide maximum strength
- Each engine individually tested for 100% quality control was
- The middle hub and v-belt pulley are manufactured from cast aluminum.
- A belt tensioner is optionally available to increase the life of the V-belt and reduce maintenance.
- 3-wing propeller is static and dynamically adjusted
- Roller bearings do not require maintenance
- The patented centrifuge system ensures full and stable opening of the louver.
- When high airflow capability is required, the EM-50 is an ideal exhaust fan. The perfect design of the propeller ensures self-cleaning and highest throughput.
- Fan enclosure and venturi are made of hard galvanized steel plate
- The shutters will provide the highest resistance made of pressed galvanized steel
- The middle hub and v-belt pulley are manufactured from cast aluminum.
Std model | |
Propeller diameter | 600 mm |
Engine Size | 250 W |
0 Pa air flow | 11,720 m3/h |
20 Pa air flow | 10,740 m3/h |
40 Pa air flow | 9,560 m3/h |
0 Pa specific performance | 27.5 m3/wh |
Munters Drive model | |
Propeller diameter | 600 mm |
Engine Size | 660 W |
0 Pa air flow | 12,729 m3/h |
20 Pa air flow | 12,090 m3/h |
40 Pa air flow | 11,414 m3/h |
0 Pa specific performance | 28.4 m3/wh |
Product descriptions
- The Euroemme® TU chimney suction fan series is designed to work safely under difficult conditions, ventilating closed enclosures with live animals.
- During cold and warm weather periods, air intake speeds should be low in live animals. Particular emphasis should be given to the variability of the rate of ventilation and the fact that animals are not left unnecessarily in the air stream.
- The Euroemme TU fan series is designed to meet these requirements.
- Roof-mounted fans prevent animals from being exposed to close-in airflow by presenting stale air from the area where animals are located.
- Another advantage of installing a roof mounted fan is that it has a redundant ventilation system in the event of a power failure. In these cases, the TU fan is opened with the air vents and the butterfly damper battery power, creating a natural ventilation way to prevent the animals from drowning.
Propeller diameter | 450 mm |
Motor | 0.33 hp |
0 Pa air flow | 6,468 m3/h |
0 Pa specific performance | 17.7 m3/wh |
Voltage | 230/380 |
Frequency | 50 |
Power | 245 W |
Current | 1,2 A |
Speed | 1350 d/d |
Flow Rate | 5500 m3 /h |
- It is used to provide air circulation in the middle of the farm.
- Body; The electrostatic powdered DKP is sacrificed.
- It's also important to keep your breathing in the closed systems. By ventilation in poultry;
Excessive heat is emitted in the environment. - The excess moisture above the desired one is removed.
- Carbon dioxide and ammonia are cleaned
- If the living is alive,
m2 with a higher number of live production with high capacity.